Bottom Panel; Power - Honeywell Dolphin 7800 User Manual

USB Port
This USB port is USB v2.0 Hi-Speed compliant. Using a USB cable, you can connect the
eBase to a USB compliant device to facilitate USB communication to and from the terminal.
USB communication occurs through Microsoft ActiveSync (v4.5 or higher) or Microsoft
Windows Mobile Device Center depending on the host workstation's operating system. When
the terminal is seated in the terminal well, it is connected to the peripheral device via the
eBase.
Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host
workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations
running Windows XP. For detailed information on ActiveSync and Windows Mobile Device
Center visit
RJ45 Ethernet Port
Use a standard CAT-5 Ethernet cable; you can connect the ebase to an Ethernet-compliant
device to facilitate Ethernet communication to and from the terminal.
This color
Green
Yellow
DC Power Jack
See Power, below.

Bottom Panel

For details on how to mount the eBase, see
Compliance Label
MAC Address Label

Power

The terminal requires 12 Volts DC input for communications and battery charging; the power adapter on
the power cable converts the voltage from the power source to 12 Volts DC. Use only a UL listed power
supply, which has been qualified by Honeywell with output rated at 12VDC and 3 amps with the device.
The operating temperature range is -10° to 50°C (14° to 122°F). Honeywell recommends that you leave
the eBase connected to its power source at all times, so that it is always ready to use.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
13 - 4
Microsoft's Windows Mobile
and status means...
Flashing Data transfer in progress.
Solid A connection has been established between the Dolphin
terminal and the Ethernet.
Solid Ethernet is connected at 100T.
Off Ethernet is connected at 10T.
Mounting the eBase
Web site.
on page 13-7.
Serial Number Label