Enabling The Wwan Radio; Voice Communication, Using The Dolphin As A Phone - Honeywell Dolphin 7800 User Manual

Enabling the WWAN Radio

By default, the WWAN radio is not enabled after a factory reset. Verify the status of the radio in the Dol-
phin Wireless Manager.
Tap on the Home screen to access the Dolphin Wireless Manager.
If the WWAN radio is OFF, tap the rectangle to enable or turn ON the radio.

Voice Communication, Using the Dolphin as a Phone

If your Dolphin model is equipped for voice + data WWAN connectivity, you can use the terminal as a
phone over the GSM radio.
Audio Modes
The front panel of the 7800 contains both a speaker and a microphone that you can use to send and
receive audio signals over the GSM network, see
There are two audio modes:
• Handset Mode - The front speaker is used for receiving handset voice calls and the front panel
microphone provides audio input to the terminal.
• Hands-Free Mode - Hands-free mode is when you use the rear speaker as a speakerphone. To
switch to speakerphone, tap on the speaker button in the Dialer window, see
Dialer Window on page 9-4.
Front Panel: 7800 on page 3-5.
Accessing the
9 - 3