Honeywell Dolphin 7800 User Manual page 165

Bottom Panel
DIN Rail Slot
Optional Mounting Holes for M3 self
tapping screws, Qty. 4. Maximum
thread depth of 7 mm.
Desk Mounting
The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface.
Hardware Required
• 3/16 in. dia x 5/8 in. long pan head screw
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
• 3/16 in. dia nut
Installing the DIN Rail
1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base.
2. Turn the base and DIN Rail right side up.
Rubber Feet, Qty. 8
16 - 7