Five Volt Control; Smart Sensor - Honeywell Dolphin 7800 User Manual

Five Volt Control

Five Volt Control gives you the option to manually enable 5V output to supply power to an external
device. By default, 5-Volt Output automatically turns on when AC power is applied to the terminal. If you
want to use a USB memory stick without AC power, then you must manually turn on the 5-Volt Output.
Do not leave 5-Volt output enabled when you are not using it to supply power to an external device.

Smart Sensor

The Smart Sensor configuration utility enables you to configure the Dolphin's integrated accelerometer,
and motion settings.
Tap > Settings > System > Smart Sensor.
Motion Settings
Motion Settings enable you to customize how the terminal responds to motion and object orientation for advanced
power management.
7 - 12
Display Settings enables or disables Auto Display
Orientation. When enabled, the Dolphin's display
automatically switches between portrait and landscape
depending on how you hold the terminal.
Power Management Settings customize how the terminal
responds to object orientation and motion.
• Save power by turning off the display or suspending the
terminal when it is placed face down.
• Modify the Motion Detection settings to wake the terminal
from suspend mode or prevent the terminal from entering
suspend mode when motion is detected.