Icom IC-V8 Service Manual page 6

SECTION 3
3-1 DISASSEMBLY INSTRUCTION
• REMOVING THE CHASSIS PANEL
1 Unscrew 1 nut A, and remove 1 knob B.
2 Unscrew 2 screws C.
3 Take off the chassis in the direction of the arrow.
4 Unplug J6 to separate front panel and chassis.
B
A
• REMOVING THE MAIN UNIT
1 Unsolder 3 points D, and unscrew 1 nut E.
2 Unscrew 2 screws F, 2 screws H, and 6 screws G (silver, 2 mm) to separate the chassis and the MAIN unit.
3
Take off the MAIN unit in the direction of the arrow.
F (black, 2 mm) x 2
DISASSEMBLY INSTRUCTIONS
Chassis
J6 (Speaker connector)
Front panel
H (black, 2 mm) x 2
G
D
D
E
(black, 2 mm) x 2
C
(silver, 2 mm) x 6
G
Shield cover
D
MAIN unit
Chassis
3 - 1
G
Guide holes