System Menu; System Menu Items - Kyocera KM-1635 Operation Manual

System Setting

System Menu

System Menu Items

System Menu
Items
01.Copy Status
02.Language
03.Image Quality
04.Initial Dens.
05.EcoPrint
06.Density steps
07.Auto Density
08.Text+Ph Dens.
09.Photo Density
5-2
The copier will enter System Menu after warm up has been completed or
when [Reset] has been pressed. The settings automatically set for the
copier in System Menu are called the Default Settings. These settings can
be freely changed to match the usage of the copier.
The following are the System Menu Items.
Change the settings as necessary in order to achieve the most efficient use
of the copier. The factory default setting is indicated by an asterisk (*).
Description
Outputs the content of the Default Settings.
Set the language of the message display.
Sets the manuscript image quality that will be
selected at the time the copier is turned on.
Sets the copy exposure at the time the copier is
turned on to Manual or Automatic.
There will be no display when Photo Density has
been selected in 03.Image Quality.
Selects the initial value of the EcoPrint Mode when
the power is turned on. The initial value of the Eco
Mode can be set to on (Enable). Exposures will be
lighter and less toner will be consumed when the
EcoPrint Mode is used.
Changes the number of the adjustment steps for the
copy's exposure. 0.5 - Setting this step enables even
finer adjustment of the exposure.
Adjusts the overall exposure of the copy when Auto
Exposure Mode is used.
Adjusts the central exposure value for the copier's
manual exposure (Text and Photo).
Adjusts the central exposure value for the copier's
manual exposure (Photo).
Reference
Available settings
--- 5-8
[Inch specifications] 5-8
English*
Francais
Espanol
Japanese
Portugues
[Metric specifications]
English
Deutsch
Francais
Espanol
Italiano
Text + Ph Dens.* 5-9
Photo Density
Text Density
Manual* 5-9
Auto
On: Enabled 5-10
Off: Disabled*
1 Step* 5-10
0.5 Step
1(lightest) to 7(darkest) 5-11
(*4)
1(lightest) to 7(darkest) 5-11
(*4)
1(lightest) to 7(darkest) 5-11
(*4)
OPERATION GUIDE
Page