Warning Lamps - PEUGEOT 208 Handbook

Instruments and controls

Warning lamps

When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on
the part of the driver.
Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the screen.
If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
Warning / indicator lamp
STOP
Service
28
State Cause
fixed, associated with It is associated with the engine
another warning lamp. oil pressure or the engine coolant
temperature.
fixed, associated with Major faults have occurred.
another warning lamp.
fixed associated with a Faults have occurred for which there
message (if a display is no specific warning lamp.
screen is fitted).
Action / Observations
Stop as soon as it is safe to do so.
Park, switch off the ignition and call a PEUGEOT
dealer or qualified workshop.
Refer to the section on this warning lamp and you
must then contact a PEUGEOT dealer or qualified
workshop.
Identify the fault by reading the message shown in the
screen (if a display screen is fitted) and refer to the
corresponding section:
- engine oil level alert,
- risk of blockage of the particle emissions filter
(Diesel).
- Diesel fuel additive level (Diesel with particle
emissions filter),
You must contact a PEUGEOT dealer or a qualified
workshop.