Indicator And Warning Lamps - PEUGEOT 3008 Handbook

The main menu and its associated
functions can only be accessed when
stationary, via buttons 1 to 4 .
A message appears in the screen,
above a certain speed threshold,
indicating that the main menu cannot be
displayed.
The trip computer displays can only be
accessed while driving, via buttons 2
and 3 (refer to the "Trip computer"
section).
Main menu
 Press button 1 for access to the main menu
and select one of the following functions:
- "Vehicle parameters",
- "Choice of language",
- "Choice of units".
 Press button 2 or 3 to move in the screen.
 Press button 1 again to confirm the
selection.
* According to country.
Vehicle parameters
This menu allows you to activate or deactivate
certain driving and comfort equipment * :
- wiper linked with reverse gear (refer to the
"Visibility" section),
- selective unlocking (refer to the "Access"
section),
- guide-me-home and welcome lighting
(refer to the "Visibility" section),
- interior mood lighting (refer to the
"Visibility" section),
- directional headlamps (refer to the
"Visibility" section),
- automatic or manual parking brake (refer to
the "Driving" section).
Choice of language
This menu allows you to select the display
language.
Choice of units
This menu allows you to select the units:
temperature (°Celsius or °Fahrenheit) and fuel
consumption (l/100 km, mpg or km/l).

Indicator and warning lamps

Visual indicators informing the driver
that a system is in operation (operation
or deactivation indicator lamps) or of the
occurrence of a fault (warning lamp).
When the ignition is switched on
Certain warning lamps come on for a
few seconds when the vehicle's ignition is
switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Associated warnings
The illumination of certain warning lamps may
be accompanied by an audible signal and a
message in the multifunction screen.
The warning lamps may come on
continuously (fixed) or flash.
Certain warning lamps may come on
in one of two different modes. Only by
relating the type of illumination to the
operating status of the vehicle can it
be ascertained whether the situation is
normal or whether a fault has occurred.
Monitoring
1
29