PEUGEOT 208 Handbook page 28

Instruments and controls
Warning / indicator lamp
Foot on
the clutch *
Automatic
wiping
Stop & Start
* Except for the active matrix instrument panel.
26
State Cause
fixed. In the STOP mode of Stop & Start,
changing to START mode is refused
because the clutch pedal is not fully
down.
fixed. The wiper control is pushed
downwards.
fixed. When the vehicle stops (red lights,
traffic jams, ...) the Stop & Start
system has put the engine into STOP
mode.
flashes for a STOP mode is temporarily
few seconds, unavailable.
then goes off. or
START mode is invoked
automatically.
Action / Observations
You must declutch fully to allow the change to engine
START mode.
Automatic front wiping is activated.
To deactivate automatic wiping, operate the control
stalk downwards or put the stalk into another position.
The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.
For more information on special cases with STOP
mode and START mode, refer to the "Stop & Start"
section.