Removing A Wheel - PEUGEOT 208 Handbook

Practical information

Removing a wheel

Parking the vehicle
Immobilise the vehicle where it does not
block traffic: the ground must be level,
stable and not slippery.
Apply the parking brake, switch off the
ignition and engage first gear * to block
the wheels.
Check that the parking brake warning
lamps in the instrument panel come on.
The occupants must get out of the
vehicle and wait where they are safe.
Never go underneath a vehicle raised
using a jack; use an axle stand.
* Position R for an electronic gearbox; P for an
automatic gearbox.
156
List of operations
Remove the bolt cover from each of
the bolts using the tool 3 (according to
equipment).
Fit the security socket 4 on the
wheelbrace 1 to slacken the security bolt
(if fitted).
Slacken the other bolts using the
wheelbrace 1 only.