Engine Oil Level Indicator - PEUGEOT 208 Handbook

Mileage recorder
The total mileage is displayed in zone A of the
screen and the trip mileage in zone B.
Trip recorder zero reset
With the trip mileage displayed, press the
button for a few seconds.

Engine oil level indicator

System which informs the driver whether the
engine oil level is correct or not.
This information is indicated for a few seconds
when the ignition is switched on, after the
service information.
The level read will only be correct if
the vehicle is on level ground and the
engine has been off for more than
30 minutes.
Oil level correct
Oil level incorrect
This is indicated by the flashing of " OIL" or
by the display of a dedicated message in the
instrument panel.
If the low oil level is confirmed by a check using
the dipstick, the level must be topped up to
avoid damage to the engine.
Oil level indicator fault
This is indicated by the flashing of "OIL_ _" or
by the display of a dedicated message in the
instrument panel. Contact a PEUGEOT dealer
or a qualified workshop.
Dipstick
Refer to the "Checks" section to locate the
dipstick and the oil filler cap on your engine.
There are 2 marks on the dipstick:
- A = max; never exceed
this level,
- B = min; top up the level via
the oil filler cap, using the
grade of oil suited to your
engine.
L L
Instruments and controls
1
37