Isofix Mountings; Isofix Child Seats - PEUGEOT 208 Handbook

"ISOFIX" mountings
Your vehicle has been approved in accordance
with the new ISOFIX regulation .
The seats, represented below, are fitted with
regulation ISOFIX mountings:
There are three rings for each seat:
- two rings A , located between the vehicle
seat back and cushion, indicated by a label,
- a ring B behind the seat for fixing the upper
strap, referred to as the Top Tether. r
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
When fitting an ISOFIX child seat to the left
hand rear seat, before fitting the seat, first
move the centre rear seat belt towards the
middle of the vehicle, so as to avoid the seat
interfering with the operation of the seat belt.
The ISOFIX child seats are fitted with two
latches which are secured on the two rings A.
Some seats also have an upper strap, known
as the Top Tether, which is attached to ring B.
To attach this strap, raise or remove the vehicle
seat's head restraint then pass the strap over
the backrest. Attach the strap by its hook on
ring B and then fully tighten the upper strap.
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
For information regarding the ISOFIX child
seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats.
Safety
6
143