Rep 11 Shield Smps Assembly - Xerox Phaser 3435 Service Manual

Repairs and Adjustments

REP 11 Shield SMPS Assembly

Parts List on: PL 1
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
1. Before removing the Shield SMPS Assembly, remove the:
- Side Cover Right,
- Duplex Drive Assembly,
2. Unplug the two connectors (HVPS, Fuser).
4-32
REP 7.
REP 10.
WARNING
HVPS connector
Figure 1
5/08
Fuser connector
Phaser 3435