Print Cartridge; Gp 10 Parts Life Cycle Maintenance Table - Xerox Phaser 3435 Service Manual

General Procedures and Information

GP 10 Parts Life Cycle Maintenance Table

Supplies Life Cycle
Print Car- 4K: For Prod-
tridge uct
10K: For Sale Toner Empty Warning
Fuser 80K(page):
Simplex
Transfer 70K(page):
Roller Simplex
PickUP Roller 150K(page):
Simplex

Print Cartridge

1. Print Cartridge Main Defects
- White Point, Black Point: White or Black point on printing image
- Image contamination: Dirty printing image
- Image Fainted: Entire Image is fainted and vertical white line emerge
- Black Line: Vertical black line emerge on printing image
2. Defect Symptoms
Symptoms
White, Black Point Clean Up OPC (10 times), if disappeared, no failure.
- If continuous, failure
Image contamina- Dirty printing image or contaminated reverse side
tion (Toner leak- - Clean up OPC (10 times) and inside of machine with cloth, if
age) disappeared, no failure.
Image Fainted After shake cartridge right and left 5~6 times, if printing image is
not fainted, no failure. (Toner Exhausted)
Vertical Black Line Vertical thin line emerge, if cartridge is scratched.
- (Customer fault)
6-48
Engine
Condition
Condition
Toner Low Warning
Toner unin-
stalled
Exhausted No Indication No Indication Replaced at
Exhausted No Indication No Indication Replaced at
Exhausted No Indication No Indication Replaced at
Criterion
Customer
LCD
Panel
Indication
Manage
Ready Low -
Toner
Ready Toner -
Exhausted
Exhausted
Exhausted
5/08
Responding
10% Remains
Initialized at toner
change
Remarks
System Setup ->
Maintenance-> Clean Drum
Phaser 3435