Callback - Siemens Gigaset M2 Professional Operating Manual

Conducting calls – the basic functions
Step by Step

CALLBACK

> <
CALLBACK
> <
MUELLER MOBILE
TH 06.02 09:23
6
Callback
This function enables you to call a user who does not
answer or whose line is busy. The Callback function en-
ables you to contact him as soon as he hangs up or re-
uses his telephone. Please note that a line is signalled
as busy when it is being called by another user. You can
continue to use your handset without restriction when
a callback has been booked.
Booking a callback
p
The number is dialled. You hear the busy tone or the
user does not answer.
[
Save the callback request.
Press the On-hook key to end the operation.
You are then called back
You are then called back:
• as soon as the selected user terminates his or her
call, or
• the first time the user uses his or her handset, or
• as soon as the other party checks his or her mailbox
and responds to your callback request (
or Press the Talk or Speakerphone key briefly. The connec-
tion is set up.
Note:
Callbacks are repeated until a connection is es-
tablished or until the callback is deleted. A hand-
set can initiate up to five callbacks and can be
the destination for up to five callback requests.
If these conditions are met, any further call-
backs are rejected.
Deleting a callback request
u Call the system menu.
[
Select the menu item and confirm.
[
The oldest entry is displayed first.
> <
Select the required command.
Page 84).