Call Forwarding; Using Call Forwarding - Siemens Gigaset M2 Professional Operating Manual

Step by Step

Call forwarding

Using call forwarding

You can program two types of call forwarding:
• Fixed call forwarding and
• Variable call forwarding.
For fixed call forwarding, you programme a forwarding
destination that will remain valid until you change or de-
lete it. You can activate and deactivate this forwarding
function.
For variable call forwarding, you can choose between
six different forwarding types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Forwarding after timeout
• Forwarding on busy/after timeout
Call forwarding is activated when a forwarding destina-
tion is programmed. When the variable forwarding func-
tion is deactivated, the forwarding destination is auto-
matically deleted.
If the handset is in idle status, you can receive the fol-
lowing display messages when call forwarding is active:
Forwarding type
Fixed call forwarding
Variable call forwarding
Forwarding for internal/
external
Forwarding on busy
Forwarding after time-
out
Forwarding on busy/af-
ter timeout
Fixed call forwarding
You can use codes to activate and deactivate call for-
warding ( Page 68).
Conducting calls – enhanced functions
Display message
"Divert to number
for example, 222 Klaus Meier
(own number)"
FWD-VAR-ALL-BOTH on
FWD-VAR-BUSY-BOTH on
FWD-VAR-RNA-BOTH on
FWD-VAR-BZ/NA-BTH on
FWD-FIXED on
61