Western Digital My Cloud EX2 User Manual page 140

Inserting a Drive
To avoid electrostatic discharge (ESD) problems, ground yourself by
Important:
touching metal before handling the device.
Preparing a Drive
The My Cloud EX2 comes with a bag holding the screws, tabs, and labels needed for
inserting the new drive. For WD replacement drives, you can reuse the parts attached to the
faulty drive.
Note: A standard phillips-head screwdriver is all you need..
1. Using a screw from the bag, attach a plastic tab to the top hole in the drive's side (on the
right if the green board is facing you).
2. Attach a screw to the corresponding hole on the other side of the drive.
3. Attach label 1 or 2 to the top of the drive. Label 1 is on the left and label 2 is on the right,
when looking down on the top of the unit. There are corresponding numbers on the
cross brace label.
Inserting One or Both Drives
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
REPLACING A DRIVE
135