Western Digital My Cloud EX2 User Manual page 116

2. If you made any changes, click Save (appears next to the updated field once a change
is made).
Note: Throughout the WD My Cloud EX2 dashboard, the Save and Cancel
buttons display only if you make changes.
Language and Clock
In this section of the General screen, you can change the language that displays in the
WD My Cloud EX2 device's interface and set the date and time. The date and time are
synchronized to the NTP (Network Time Protocol) server by default. You have the option of
setting the date and time manually or allowing the NTP to access the Internet and
automatically set the time. If you are not connected to the Internet, you must enter the date
and time manually.
1. In the Language & Clock section, view or modify the following settings
Language
Time Zone
NTP Service
Primary Server
Date & Time
Time Format
2. Click Save for each change you make.
WD MY CLOUD EX2 PERSONAL CLOUD STORAGE
USER MANUAL
From the drop-down list, select the language you'd like to
display on your WD My Cloud EX2 Personal Cloud
Storage web pages. The default language is English.
From the drop-down list, select the time zone where your
device is located.
Enable or disable NTP service, which automatically
synchronizes your device to update the time and date. A
dialog box displays current NTP servers. You can add
another NTP server if you choose.
Change the primary server used for your NTP service.
• To change the primary server used for your NTP
service, click
Configure
• Click , and then enter the URL address of
Add User NTP
the new primary server.
• Click .
Save
Displays the device date and time. This information is
synchronized to the NTP (network time protocol) server by
default.
From the drop-down list, select 12 (12-hour clock) or 24
(24-hour clock).
CONFIGURING SETTINGS
:
,
111