Printer Specifications - Kyocera FS-1020D Operation Manual

C.1 Printer Specifications
Item
Printing method
Printing speed
Resolution
First print
Warm-up time
Controller
Main memory
Self test
Maximum duty cycle
Drum
Developer
Main charger
Transferring
Separation
Drum cleaning
Drum discharging
Fuser
Toner saving
Paper
Waste toner capacity
Paper feed trays
Capacity of output trays
Table C-1
Electrophotography, laser scan
Simplex printing : 20 pages/minute (A4 size/Plain)
21 pages/minute ( Letter size/Plain)
Duplex printing : 10 pages/minute (A4/Letter size/Plain)
When printing multiple copies of the same page
Fast 1200 mode
600 dpi (vertical and horizontal) with KIR (Kyocera Image
Refinement)
300 dpi (vertical and horizontal) with KIR (Kyocera Image
Refinement)
Approx. 10 seconds or less (A4 or letter size), depends on input data
Approx. 15 seconds or less (from power on)
at 23°C, 120 or 220 V
PowerPC 405 266 MHz
16 MB, expandable up to 272 MB
Performed at power-up
20,000 pages/month
Organic Photoconductor
Mono-component dry developer
Positive scorotron charger
Negative charger roller
Curvature separation
Blade cleaner
Illumination by eraser LED array
Heat roller and pressure roller
EcoPrint mode
Plain paper (See Chapter 3
More than 100,000 pages (with 5% print coverage)
Cassette: Legal, Oficio II, Folio and A5 to A4/letter size universal
cassette [148 to 216 mm (5-13/16 to 8-1/2") × 210 to 297
mm (8-1/4 to 11-11/16")]. Holds 250 sheets of thickness
0.11 mm
MP tray: 70 to 216 mm (2-4/5 to 8-1/2") × 148 to 297 mm (5-13/16
to 11-11/16") (see page 4-4). Holds 50 sheets of thickness
0.11 mm.
Duplex printing is only available for A4 or Letter, or Legal size
paper.
Face-down tray: 250 sheets of thickness 0.11 mm
C-2

Printer Specifications

Description
)