Kyocera FS-1020D Operation Manual page 61

4
Enter the password you want to set in New password. For
confirmation, enter the same password in Retype new password.
Click the OK button. The password is set for the KM-NET Remote
Operation Panel. We recommend that you record your password so
that you do not forget it. Next time you click the MENU button, a
password prompt appears as shown below. Enter your password and
click the OK button. The Menu dialog box appears.
To Change the Password
Perform the following procedure when you want to change your password
or remove the password function from the KM-NET Remote Operation
Panel utility.
Display the password settings screen (page 1-50) and enter your current
password in Old password. To set a new password, enter your new
password in New password and Retype new password, then click the OK
button to set the new password. To remove the password function, leave
New password and Retype new password blank, then click the OK button.
Enter the new password.
Enter the same password
for confirmation.
1-51
Other Settings