Maintenance Messages - Kyocera FS-1020D Operation Manual

3.3.1

Maintenance Messages

Indicator
Table 3-3
The following table lists error messages that can be dealt with by the user.
Read the explanations carefully.
Remote Operation
Panel display
Add paper <paper source>
Close
top cover
Load Cassette #
<paper size><paper type>
Load MP tray
<paper size><paper type>
Paper jam
############
The paper has run out. Add paper to the
paper cassette (1 or 2) or MP tray.
The paper source is displayed in the KM-NET
Remote Operation Panel.
The paper cassette is not closed securely.
Close the paper cassette properly.
The top or front cover is open.
Close the cover properly.
There is data for printing that matches with a
paper cassette setting (paper size, paper type),
but there is no paper in the paper cassette.
Set paper of the size and type specified in the print
data into the cassette (1 or 2) to resume printing.
When you want to feed from a other paper source,
press the key to switch the paper source. The
printer prints on the paper size and type set in that
particular paper source.
The cassette paper size and data paper size
are not the same.
The printer feeds from the MP Tray when the page
in the paper cassette is a different size and type
than that specified in the print data. Set paper of
the size and type specified in the print data into the
MP tray, then press the
When you want to feed from a source other than the
MP tray, make sure there is no paper in the MP
tray, then press the
source. The printer prints on the paper size set in
that particular paper source.
Feeding the paper having a paper size
which does not match the current paper
size from the MP tray can cause paper jam.
ote
Open the printer and clear the paper jam.
The location of the paper jam is also indicated in
place of #'s.
For details on how to clear paper jams, see section
3.4 Paper Jam Removal
3-7
Corrective Action
key to resume printing.
key to switch the paper
on page 3-15.
Indicators