Kyocera FS-1020D Operation Manual page 16

Operator Panel
9 — Toner Gauge
This shows the approximate level of remaining toner. When the value is
100, the toner container is full. The closer to 0, the smaller the amount of
remaining toner.
10 — Interface Information
This information shows all interfaces installed in the printer and the
currently selected interface (marked with an asterisk).
The Font section shows the font that is automatically selected when the
printer starts up (default font). It is possible to set different default fonts
for each interface.
11 — KIR Test Pattern
This shows the KIR test pattern. You can confirm whether KIR is on or off.
1-6