Indicators - Kyocera FS-1020D Operation Manual

3.3

Indicators

There are four indicators on the printer's operator panel. These light, flash,
and turn off in combination to indicate the printer's current status. This
section explains the indicators on the operator panel and the appropriate
corrective action to take in each case.
Indicator displays can be classified into three categories: maintenance,
errors, and normal. In the following table, indicators are shown to be lit,
flashing, or off. Further, flashing is divided into two speeds, fast and slow.
Lit
Red/Green
Fast Flashing
Red/Green
Slow flashing
Red/Green
Off
Grey
By using the KM-NET Remote Operation Panel utility, you can monitor the
printer's status from the computer. When a printer error occurs, the error
message is displayed on the computer's screen. The KM-NET Remote
Operation Panel's display is described in the following tables.
3-6
Indicators