Entering The Password; Selecting The Display Language - Minolta Pi1802e User Manual

10

Entering the Password

The Password input box appears in the page where PageScope Light for
Pi1802e settings can be changed.
The password is required in order to specify PageScope Light for
Pi1802e settings. Once the password is entered, it is valid until
PageScope Light for Pi1802e is closed.
NOTE
è The initial default administrator password is "sysadm".
è Change the password using the "Preference" menu on the "System"
tab.

Selecting the Display Language

If necessary, the display language of PageScope Light can be changed
to match the operating environment.
Start up PageScope Light, click the [Preference] menu at the left of the
screen, and then select the desired setting under "Panel Language". This
setting only applies to the display language of PageScope Light.
10-4
PageScope Light
Pi1802e