Connecting To The Parallel Port (Local Connection) - Minolta Pi1802e User Manual

2
2.1

Connecting to the Parallel Port (Local Connection)

Use the parallel cable to connect the parallel port of the printer controller
to the parallel port of the computer.
IMPORTANT
è Be sure to use a shielded parallel cable. Use of an unshielded cable
may result in radio frequency interference.
è
The parallel port is compatible with IEEE1284 Type B standards.
1
Make sure that the Digital Copier and the computer to be connected
to the Digital Copier are turned OFF.
2
Connect one end of the parallel cable to the parallel port (printer port)
of the computer.
3
Connect the other end of the cable to the parallel port of the printer
controller installed in the Digital Copier.
This completes the connection of the printer controller to the
computer.
2-2
Connecting to a Computer
Pi1802e