Table of Contents
Advertisement
Troubleshooting
8
Troubleshooting
If a problem occurs during PC printing, check the following.
The control panel operations differ according to the functions of the
digital copier. Refer to the page corresponding to the model being used.
l
Di152/Di183
l
Di152f/Di183f, or Di152/Di183 with
the fax unit installed
8.1
Correcting Errors for the Di152/Di183
If a PC print error occurs with the Di152/Di183, the error appears in the
display.
For paper jam, paper size, paper empty, or replenish toner errors, the
error will appear in the display or control panel as it would if the Digital
Copier was in Copy mode.
Main Error Messages
The error messages that may appear during PC Print mode are described
here.
For details about error messages that also appear during Copy mode,
refer to the Di152/Di183 User Manual.
Error Display
Pi1802e
"8.1 Correcting Errors for the Di152/
Di183" on page 8-1
"8.2 Correcting Errors for the Di152f/
Di183f" on page 8-3
Cause
If the optional Job Tray is
installed and the paper in the
Upper Copy Tray has
reached the maximum
capacity, printing cannot
continue.
"Auto" is selected under
"Paper Source" in the printer
driver, but paper of a
suitable size is not loaded.
Paper of the size specified in
the printer driver is not
loaded into the specified
paper tray.
Remedy
Remove all paper from the
Upper Copy Tray of the Job
Tray.
Load paper of the indicated
size.
Otherwise, press the [Start]
key to print on paper that is
currently loaded.
Load the specified size of
paper into the specified
paper tray.
Otherwise, press the [Start]
key to print on paper that is
currently loaded.
8
8-1
Advertisement
Table of Contents
