Connecting to a Computer
2
Connecting to a Computer
Connect the printer controller to the computer using either of the
following two methods.
To connect to the parallel port
Using a parallel cable, locally connect the printer directly to a computer.
Refer to "2.1 Connecting to the Parallel Port (Local Connection)" on page
2-2.
To connect to the Ethernet 10/100Base-T port
If the printer is to be used on a network, connect it using a
10/100Base-T cable.
Refer to "2.2 Connecting to the Ethernet 10/100Base-T Port (Network
Connection)" on page 2-3.
IMPORTANT
è
If the printer is to be used on a network, the optional network interface
card NC-3 must be installed.
Pi1802e
2
2-1