Table of Contents
Advertisement
Digital Copier Control Panel Operations (PC Print Mode)
[Printer] Indicator/[Start] Key
The status of PC printing can be checked with the indicator.
[Printer] indicator
Flashing
Lit
Off
Cancelling a Print Job
PC printing of data can be cancelled from the control panel of the Digital
Copier. A print job can only be cancelled from the control panel while the
Digital Copier is in PC Print mode.
1
Check that the Digital Copier is in PC Print mode.
"Prn" appears in the display when
the Digital Copier is in PC Print
mode.
2
Press the [Stop] key for 3 seconds.
When a job is cancelled, "Prn" on
the display flashes.
If the PC printing data is lost when
the job is cancelled, the Digital
Copier automatically returns to the
mode it was in before entering PC
Print mode.
NOTE
è
To cancel a print job when there is no paper, when there is a paper
size error or when loading paper into the manual bypass tray, hold
down the [Stop] key for 3 seconds.
è
The print job cannot be cancelled while data is being received.
Pi1802e
[Start] key's
Printing status
indicator
Lit in green/orange
Receiving data from the computer
In addition, the received PC print data is not
yet printed.
Lit in orange
Data received from computer is being printed.
No copy operation can be performed.
Lit in green
There is no data received from the computer.
5
5-3
Advertisement
Table of Contents
