Table of Contents
Advertisement
7
7.4
Printing via a NetWare Server
The procedure for using Windows to print on a printer connected to a
NetWare server is described below.
Before You Begin
Check the following points.
l The TCP/IP settings should be specified from the control panel of the
Digital Copier. (Refer to "6 Digital Copier Settings for Use on a
Network" on page 6-1.)
l The NetWare settings should be specified using the enclosed
PageScope Light. For details, refer to the PageScope Light for
Pi1802e User Manual.
l With the NetWare server, specify the print queue, print server and the
printer structure settings. For details, refer to the NetWare manual.
l For Window 95/98/Me, check that the "
Protocol
on Windows. For details, refer to the Windows manual.
l For Window NT 4.0, check that the "
has been installed on Windows. For details, refer to the Windows NT
4.0 manual.
l Turn on the Digital Copier.
Settings for Windows 95/98/Me
1
Install the printer driver for Windows 95/98/Me. For details on the
installation procedure, refer to "3.1 Windows 95/98/Me" on page 3-2.
During installation, set up the printer as a local printer.
2
Right-click the new printer icon and select "Properties" from the
menu.
3
Display the "Details" tab on the Properties dialog box.
4
Click the [Add Port] button.
The Printer Ports dialog box appears.
5
Click the [Browse] button.
The Browse for Printer dialog box appears.
6
In the network computers, select the printer icon labeled with the
Netware print queue you will use.
7-10
Network Printing in a Windows Environment
Client for NetWare Networks
" and "
IPX/SPX-compatible
" have been installed
Client Service for NetWare
"
Pi1802e
Advertisement
Table of Contents
