Removing The Lid And A Lid Hinge - Whirlpool Cabrio WTW6200S User Manual

REMOVING THE LID AND A LID HINGE

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Remove the console from the top of the
washer (see step 2 on page 4-2 for the
procedure).
Top Lid Hinge Screws
3. To remove the lid:
a) Raise the lid and remove the two hinge
pin screws from both sides.
Washer Lid
b) Pull the two hinge pins out of the lid,
4. To remove a lid hinge:
a) Remove the lid (see step 3).
b) Remove the top hex-head screw from
Lid Hinge
Pin Screws
4-9
and remove the pins and the lid from
the washer.
Remove Lid
Hinge Pin
Pull Out
the hinge you are removing.
Top Hinge Screw