Whirlpool Cabrio WTW6200S User Manual page 67

DISPLAY
(Saved Code)
ATC Thermistor Open/Short
F then 40 flashes when the ATC Thermistor is detected to be open or shorted. See TEST #5.
(F40)
Motor RPS Thermistor Open/Short
F then 41 flashes when the motor rotor position sensor (RPS) thermistor is detected to be open or shorted.
See TEST #3.
(F41)
NOTE: This error code is only displayed when viewing saved fault codes. See Diagnostic Test for accessing
saved fault codes.
Heater Thermistor Open/Short (Not Used)
F then 42 flashes when the heater thermistor is open or shorted.
(F42)
Motor Stalled
F then 50 flashes when the motor rotor position sensor (RPS) senses no rotation.
Does basket turn freely? If not, make sure bottom shipping pack has been removed. Determine cause of friction.
•
(F50)
If basket turns freely, see TEST #3.
•
Motor RPS Failure
F then 51 flashes when there is a motor rotor position sensor (RPS) failure. See TEST #3.
(F51)
Motor Stop Failure
F then 52 flashes when the motor rotor position sensor (RPS) senses rotation after stop command. See TEST #3.
(F52)
Motor Control Overtemp
F then 53 flashes when the machine/motor control detects high temperature for the motor module.
Does basket turn freely? If not, determine cause of friction.
•
(F53)
If basket turns freely, see TEST #3.
•
Motor Control Overcurrent
F then 54 flashes when the machine/motor control detects high current for the motor module.
Does basket turn freely? If not, determine cause of friction.
•
(F54)
If basket turns freely, see TEST #3.
•
Basket Re-engagement Failure
F then 72 flashes when the basket check routine fails to determine if the basket is re-engaged after being disengaged.
Is the basket floating? If yes, pump out water. See Long Drain.
•
(F72)
Does basket turn freely? If not, determine cause of friction.
•
If drain pump turns on when there is no water in tub,
EXPLANATION AND RECOMMENDED PROCEDURE
6-3