Whirlpool Cabrio WTW6200S User Manual page 27

CASUAL/PERM PRESS
Use this cycle to wash loads of no-iron fabrics
such as sport shirts, blouses, casual business
clothes, permanent press and blends. This
cycle uses medium-speed wash action, a me-
dium-speed spin, and a cool down process to
reduce wrinkling.
COLORS/DARKS
Use this cycle for dark or highly dyed natural
fabrics such as jeans or other cotton items
that may be susceptible to dye loss. This cycle
uses low to medium-speed wash action and
high-speed spin. For best results use cold or
warm water.
DELICATE
Use this cycle to wash lightly soiled garments
indicating "Machine Washable Silks" or "Gen-
tle" cycle on the care label. This cycle uses
low-speed wash action and low-spin speeds
for increased fabric care and less wrinkling.
HANDWASH / WOOL
Use this cycle to clean lightly soiled special
care garments or for items labeled as "Machine
Washable Wool." (Check label instructions to
make sure that the garment is washable.) This
cycle uses intermittent low-speed wash action
and low-speed spin for the gentlest fabric care
with less wrinkling.
Garments are labeled "Handwash" be-
cause:
• The fiber construction may be sensitive to
wash action.
• The fabric contains sensitive dyes that may
bleed.
NOTE: Some "Handwash" items naturally
shrink when washed. Keep this in mind when
you purchase items labeled "Handwash."
Items that shrink should be dried flat. When
these items are still wet, "block" them by gently
stretching to the original measurements.
RINSE & SPIN
Use this option to get a deep rinse followed by
a high-speed spin. The time display will include
an estimate of how long it will take to fill and
drain the washer.
When to use Rinse & Spin:
• For loads that need rinsing only.
• For completing a cycle after the power has
been off.
To use or change Rinse & Spin setting:
1. Turn knob to RINSE & SPIN until the Rinse
& Spin indicator light glows.
2. Press START.
DRAIN & SPIN
An extra drain and spin may help shorten dry-
ing times for some heavy fabrics or special-
care items. Drain & Spin may also be used for
draining the washer after canceling a cycle or
completing a cycle after a power failure.
To use or change Drain & Spin setting:
1. Turn knob to DRAIN & SPIN until the Drain
& Spin indicator light glows.
2. Press START.
MODIFIERS
Modifiers allow you to further customize the
cycles and save energy.
SOIL LEVEL
Soil level (wash time) is preset for each cycle.
See "Preset Cycle Settings" in "Cycles." As you
press the Soil Level pad, the cycle time (min-
utes) will increase or decrease in the Estimated
Time Remaining display, and a different wash
time will appear. To get the minimum wash time,
press the pad until the indicator light next to
Light Soil Level illuminates. This is the shortest
wash time available for that cycle.
3-7