Color Balance - Xerox DocuColor 5252 System Administration Manual

Color Balance

Do c u Co lo r 52 5 2 S y s te m A dm i n is t r a ti o n G ui d e
The Color Balance feature allows you to set the default levels for
the four process colors (Cyan, Magenta, Yellow, Black) on the
Image Quality screen. You can set the defaults for areas of high,
medium, and low density on the scanned prints. You can also set
the default for each density level and each color independently in
any combination.
Key point: Remember that adjusting the density of any of the
process colors affects the complementary colors that use that
color.
1
Touch the Color Balance button on the Feature Defaults 1
screen. The Color Balance screen appears.
2
Touch the button for the color that you want to change.
3
Use the up or down arrow buttons to obtain the desired settings
for Low, Medium, and High Densities. The available range is -3 to
+3.
4
Repeat the previous step for each color you want to change.
5
Touch the Close button to return to the Feature Defaults 1 screen.
Too l s M od e
2-95