Too l s M o de
Entering Tools Mode
2- 2
Use the following procedure to enter the Tools Mode:
1
Press the Access button on the Control Panel. The Access
Password Screen appears.
2
Use the keypad to enter the Tools Mode password. The default
password is five 1s (11111). For security reasons, only asterisks
are displayed on the screen.
3
Touch the Enter button on the screen. The Pathway Options
screen appears:
Note:
It is recommended that you change the Tools password as
soon as possible after installing the digital press to prevent
unauthorized access to the Tools Mode. The procedure for
changing the password is in the next chapter.
4
Touch the Tools Pathway button on the screen.
D oc u Co l or 5 25 2 S y s te m A d mi n i s tr a ti o n G ui d e