Chapter 2 General Installation; Step 1: Install The Software - Socket Low Power Wireless LAN Card User Manual

Chapter 2 General Installation

This chapter covers general installation of the SDIO WLAN Card. After
completing the steps in this chapter, proceed to the chapter for your Pocket
PC type (2002 or 2003) and type of WLAN network to learn how to
configure settings and connect to your network.

STEP 1: Install the Software

1. Make an active connection between your device and a host PC. Use
ActiveSync and a serial/USB/Ethernet connection cable or cradle.
2. Insert the Socket SDIO WLAN CD.
3. Use My Computer or Windows Explorer to access your CD-ROM drive.
In the CD, click on SETUP.EXE.
4. Follow the instructions on your screen to install the software.
5. When software installation is complete, a message will appear on your
Pocket PC directing you to soft reset your device. Tap OK.
6. Disconnect the Pocket PC from the host PC. Soft reset the device by
pressing the reset button. Now you are ready to insert the WLAN card
into your Pocket PC.
GENERAL INSTALLATION | 7