Chapter 4 802.1X Networks For Pocket Pc 2003; Step 1: Prepare Network Information - Socket Low Power Wireless LAN Card User Manual

Chapter 4 802.1x Networks for
This chapter explains how to use the Low Power SDIO WLAN Card with a
Pocket PC 2003 to connect to an 802.1x network. Before you try to
connect, be sure to install Socket's software and insert the card, as
described in Chapter 2, "General Installation."

STEP 1: Prepare Network Information

Verify Card and Network Compatibility
Socket's card cannot connect to an 802.1x network unless the network satisfies
the four requirements below. Consult with your network administrator.
Windows Internet Information Service (IIS)
Windows Internet Authentication Service (IAS)
Windows Certification Authority (CA) with automatic approval and correct
Pocket PC certificate format (via MS certificate template)
Access point configured only for 802.1x (i.e., no multi-mode support or static
128-bit WEP keys)
Prepare Security Settings
If the network is compatible, ask the administrator for necessary security settings:
Wireless network name, known as ESSID or SSID (case sensitive)
Authentication type, user name, password
Use of either DHCP or Static IP to assign IP addresses
Authentication permission restrictions (e.g., domain administrators only)
For a Network Information Form that you can send to your network
administrator, go to any of the following:
• Appendix C of this User's Guide
• Docs folder on the CD
• Visit:
ftp://ftp.socketcom.com/wlan/WLAN_NetworkForm.txt
Note: If your network only allows domain administrators to authenticate, ask
your network administrator to assign you this privilege.
Obtain 802.1x Certificate(s)
Ask the administrator for a copy of the root certificate from a Trusted Root
Authority (no intermediary authority). Installation instructions are in Step 3.
EAP-TLS only: You also need to set up a cabled connection to the network to
install a personal certificate. Installation instructions are in Step 3.
14 | CHAPTER 4
Pocket PC 2003