Configure Network Settings - Socket Low Power Wireless LAN Card User Manual

Configure Network Settings

1. Tap on the Socket status icon in the menu bar. In the pop-up menu, tap
Configuration...
2. Use the Config screen to manage your WLAN profiles. To create a new
profile, select an Active SSID to create a profile for it, or tap on the New
Profile button to create a profile for a network regardless of its status.
Use the next screen to enter your profile properties, then tap OK.
3. Use the buttons at the top of the screen to manage your profiles. Make
sure a profile is selected if you wish to perform an action on it.
Alternatively, you can tap and hold your stylus in the Preferred Profiles
box to access a pop-up menu.
You can save multiple profiles. The WLAN card will try to connect to
networks in order of preference, starting from the top.
New Profile
Modify Profile
4. After entering/modifying settings, tap Apply.
28 | CHAPTER 5
Delete Profile
Move Down
Move Up