Configure Advanced Settings - Socket Low Power Wireless LAN Card User Manual
Low power wireless lan card
Hide thumbs
Also See for Low Power Wireless LAN Card:
- User manual (39 pages) ,
- Quick start manual (40 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
Configure Advanced Settings
1. Tap on the Socket status icon in the menu bar. In the pop-up menu, tap
Advanced Configuration...
2. Use the Advanced screen to configure the appropriate settings, then tap
Apply.
Power Save Mode:
• Disable: Select for best performance
• Always Enable: Optimizes energy efficiency
• Auto Enable: On AC power, disables Power Save. On battery power,
enables Power Save.
Preamble Mode:
• Auto Tx Preamble (Recommended): Auto-adjusts based on the access
point
• Long Tx Preamble: Select for access points that only use long
preambles
• Short Tx Preamble: Select for access points that only use short
preambles
Note: The Authentication Algorithm field is disabled for Windows Mobile
2003 because authentication is handled through Zero Configuration.
SDIO WLAN UTILITY | 29
Advertisement
Table of Contents
Need help?
Do you have a question about the Low Power Wireless LAN Card and is the answer not in the manual?