Socket Low Power Wireless LAN Card User Manual page 23

4. The Settings screen will appear. Enter the appropriate settings for your
network, as advised by your network administrator.
TX Rate: Default is Fully Auto.
Chan: Default is automatic selection.
Specify only if using Ad Hoc Mode.
Open System:
For WEP Method, select Disabled.
Tap OK.
WEP-Enabled:
Select the appropriate WEP Method for
your network, then enter the Key ID and
Encryption Key. When done, tap OK.
5. The network will appear in the Preferred Profiles list. Select it and tap
Apply.
6. The WLAN card will try to connect to the network. To verify the card's
connection status, you can tap on the Status tab.
OPEN OR WEP-ENABLED NETWORKS FOR PPC 2002 | 23