Cli Commands - Hitachi US7070447-001 Troubleshooting Manual

Draft Level—Hitachi Confidential

CLI Commands

/ETHERNET/SHOW >port
/ETHERNET/SHOW >stat
/ETHERNET/SHOW >count <port#>
/ETHERNET/SHOW >macaddrcount
/ETHERNET/CONFIG >clear <port#>
/ETHERNET/CONFIG >port
/ETHERNET/CONFIG/FLUSH
>portflush <port#>
/ ETHERNET/CONFIG >stat <port#>
Doc Part Number, Version Number
Troubleshooting at the MAC Layer
Displays all port speeds, duplexity,
autonegotiation.
Displays if Ethernet statistics are enabled/
disabled on a per port basis.
Displays tx/rx statistics & Ethernet errors on
a per port basis.
Displays the total count of MAC source
address entries in the Bridge Forwarding
Table.
Resets the port statistic counts to zero.
Configures the port speed, duplexity,
autonegotiation.
tbd
Enables/Disables Ethernet statistics on a
per port basis.
9-5