Cli Commands - Hitachi US7070447-001 Troubleshooting Manual

HiSpeed Switch Troubleshooting Guide
Problem:
Solution:

CLI Commands

/INET/CONFIG/ipr
/INET >ping <hostname>
[NumberofPackets]
/INET >rlogin <hostname>
/INET/CONFIG/ROUTE >
• ADD
• DEFAULT
• DELETE
• RMDEFAULT
/INET/SHOW >
• ARP
• ROUTE
• STATIC
• ICONNECT
• RTCACHE
/INET >stats
• FORWARD
• ICMP
• IP
• SNMP
• TCP
• UDP
10-6


and performance issues. If using static routes on the HiSpeed switch,
you must configure those routes on those directly connected switches
and routers. On the HiSpeed switch, use the following command:
/INET/SHOW >static
/INET/CONFIG/ROUTE/add
Cannot establish a telnet session to the switch.
The HiSpeed switch uses the well known TCP port 23 for Telnet. Verify
that the socket is in a 'Listen' state.
/INET/SHOW >iconnect:
Draft Level—Hitachi Confidential
Enables/disables Route Cache Forwarding.
Performs an ICMP echo request.
Used when logging onto a Unix server.
Commands available for configuring static and
default routes.
Commands available for displaying Routing
tables, ARP cache, and TCP/IP connections.
Commands available for displaying IP statistics.
US7070447-001, Rev 01