Cli Commands - Hitachi US7070447-001 Troubleshooting Manual

Draft Level—Hitachi Confidential

CLI Commands

/FDDI/SHOW/MAC>nbraddr
/FDDI/SHOW/MAC>status
/FDDI/SHOW/MAC>stats
/FDDI/SHOW/MAC>counters
/FDDI/SHOW/PORT>counters
/FDDI/SHOW/PORT>status
/FDDI/SHOW/PORT>summary
/FDDI/SHOW/PORT>counters
/FDDI/SHOW/SMT>id
/FDDI/SHOW/SMT>status
/FDDI/SHOW/SMT>summary
/FDDI/CONFIG/BRIDGE >
US7070447-001, Rev 01
Displays the FDDI MAC Neighbor address table.
Checks for the status of the Ring Management
state, duplicate address tests, and time values.
Displays the number of tx/rx frames, error frames,
copied frames, and thresholds.
Displays the timer expirations, number of tokens,
ring operational states.
Reports the number of times the Link Confidence
tests passed/failed.
Displays the Connect state and PCM state of the
switch.
Summary of the SMT Port Configuration.
Reports the number of times the Link Confidence
tests passed/failed.
Displays the SMT versions and station ID.
Displays the SMT station status.
Displays the SMT station configuration table.
Used to configure FDDI modes. The following
subcommands are available:
• ADD
• AGE
• DELETE
• MODE
FDDI Concepts
12-9