Program Description - CTEK 1027 User Manual

PROgRAM DESCRIPTION

Desulphation
Revives a
sulphated battery
PARAMETERS
The charger starts charging the target battery when the voltage of the supply source exceeds
13.4V for 5 sec. The charger stops charging the target battery when the voltage of the supply
drops below 12.8V for 10 sec.
Desulphation
Desulphation with pulses
restores sulphated batteries.
6
Soft Start
Soft Start
Soft Start
Current is increased to 20A in
a controlled manner.
Bulk
Bulk charge
Bulk
Main charge, where 80%
of the batteries capacity is
recovered. The charger deliv-
ers maximum current until the
terminal voltage has risen to
the correct level. Bulk has a
maximum time, 8h, at which
point the charger automati-
cally switches to Absorption.