Figure 5 Connecting A Microfilter; Figure 6 Connecting A Microfilter And Y-Connector - ZyXEL Communications P-660HW-Tx v3 User Manual

Figure 5 Connecting a Microfilter

You can also use a Y-Connector with a microfilter in order to connect both your modem and a
telephone to the same wall jack without using a POTS splitter.
1 Connect a phone cable from the wall jack to the single jack end of the Y-Connector.
2 Connect a cable from the double jack end of the Y-Connector to the "wall side" of the
microfilter.
3 Connect another cable from the double jack end of the Y-Connector to the ZyXEL
Device.
4 Connect the "phone side" of the microfilter to your telephone as shown in the following
figure.

Figure 6 Connecting a Microfilter and Y-Connector

This section relates to people who use their ZyXEL Device with ADSL over ISDN (digital
telephone service) only. The following is an example installation for the ZyXEL Device with
ISDN.
P-660HW-Tx v3 User's Guide
ZyXEL Device With ISDN
Chapter 1 Introducing the ZyXEL Device
43