M4 Tap Screw And Masonry Plug; Figure 176 Wall-Mounting Example; Figure 177 Masonry Plug And M4 Tap Screw - ZyXEL Communications P-660HW-Tx v3 User Manual

3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyXEL Device with the connection cables.
5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the
ZyXEL Device on the screws.

Figure 176 Wall-mounting Example

24.2.1 M4 Tap Screw and Masonry Plug

The following are dimensions of an M4 tap screw and masonry plug used for wall mounting.
All measurements are in millimeters (mm).

Figure 177 Masonry Plug and M4 Tap Screw

P-660HW-Tx v3 User's Guide
Chapter 24 Product Specifications
289