Mac Filter; Figure 90 Mac Address Filter; Table 51 Mac Address Filter - ZyXEL Communications P-660HW-Tx v3 User Manual

Chapter 9 Wireless LAN
Table 50 Wireless LAN: Advanced
LABEL
Apply
Cancel

9.3.6 MAC Filter

To change your ZyXEL Device's MAC filter settings, click the Edit icon in the Network >
Wireless LAN screen. The screen appears as shown.

Figure 90 MAC Address Filter

The following table describes the labels in this menu.

Table 51 MAC Address Filter

LABEL
Active MAC
Filter
Filter Action
Set
MAC
Address
Back
138
DESCRIPTION
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless client that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Back to return to the previous screen.
P-660HW-Tx v3 User's Guide