Table 28 Manually assign a WPA key
LABEL
Next
Exit
5.3.2 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 58 Manually assign a WEP key
The following table describes the labels in this screen.
Table 29 Manually assign a WEP key
LABEL
Key
Back
Next
Exit
5 Click Apply to save your wireless LAN settings.
P-660HW-Tx v3 User's Guide
DESCRIPTION
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
DESCRIPTION
The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters or 10 or 26 hexadecimal characters ("0-9", "A-F")
for a 64-bit or 128-bit WEP key respectively.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 5 Wizard Setup for Internet Access
87