Storing Changed Preset Parameters - Rocktron CHAMELEON User Manual

2
Step 1
While viewing a function or parameter title, press the STORE button to start the store procedure. The
display will now alternate between the destination preset number and title and "STORE AT PRESET".
Step 2
Turn the PRESET control to select the desired preset number to store the new parameter values into. (If
you wish to store the new parameter values into the current preset number, this step is not necessary.)
The display will now alternate between the new preset number and "STORE AT PRESET".
Note: Turning the FUNCTION SELECT control at this time will cancel the store procedure.
Step 3
Press the STORE button a second time to store the new values into the selected preset number. The
display will briefly flash "STORED" before displaying the new preset number and title. (Note: Turning
either the FUNCTION SELECT or PARAMETER SELECT controls before completing this step will
cancel the store procedure.)
NOTE: If a preset with altered parameters is exited before completing Step 3, all edited parameter values will be lost.
When saving altered parameters, make sure the display flashed "STORED" before exiting the store procedure.
1,3,4
69