System Ip - TP-Link JetStream TL-SG3424 User Manual

configured.
2. When the DST is enabled, the default daylight saving time is of Europe in predefined mode.

4.1.5 System IP

Each device in the network possesses a unique IP Address. You can log on to the Web
management page to operate the switch using this IP Address. The switch supports three modes
to obtain an IP address: Static IP, DHCP and BOOTP. The IP address obtained using a new mode
will replace the original IP address. On this page you can configure the system IP of the switch.
Choose the menu System →System Info →System IP to load the following page.
The following entries are displayed on this screen:
IP Config

MAC Address:
IP Address Mode:
IP Address:
Subnet Mask:
Default Gateway:
Note:
1. Changing the IP address to a different IP segment will interrupt the network communication,
so please keep the new IP address in the same IP segment with the local network.
2. The switch only possesses an IP address. The IP address configured will replace the original
IP address.
Figure 4-7 System IP
Displays MAC Address of the switch.
Select the mode to obtain IP Address for the switch.
Static IP: When this option is selected, you should enter IP

Address, Subnet Mask and Default Gateway manually.
DHCP: When this option is selected, the switch will obtain

network parameters from the DHCP Server.
BOOTP: When this option is selected, the switch will obtain

network parameters from the BOOTP Server.
Enter the system IP of the switch. The default system IP is
192.168.0.1 and you can change it appropriate to your needs.
Enter the subnet mask of the switch.
Enter the default gateway of the switch.
18