System Ip - TP-Link TL-SL3452 User Manual

Get GMT:
Synchronize
PC'S Clock:
DST Config
DST Status:
Start Time:
End Time:
Note:
1. The system time will be restored to the default when the switch is restarted and you need
reconfigure the system time of the switch.
2. When Get GMT is selected and no time server is configured, the switch will get time from the
time server of the Internet if it has connected to the Internet.

4.1.4 System IP

Each device in the network possesses a unique IP Address. You can log on to the Web
management page to operate the switch using this IP Address. The switch supports three modes
to obtain an IP address: Static IP, DHCP and BOOTP. The IP address obtained using a new mode
will replace the original IP address. On this page you can configure the system IP of the switch.
Choose the menu System→System Info→System IP to load the following page.
The following entries are displayed on this screen:
IP Config
MAC Address:
When this option is selected, you can configure the time zone and
the IP Address for the NTP Server. The switch will get GMT
automatically if it has connected to a NTP Server.
Time Zone: Select your local time.
Primary/Secondary NTP Server: Enter the IP Address for the
NTP Server.
with When this option is selected, the administrator PC's clock is
utilized.
Enable or Disable DST.
Select start time.
Select end time.
Figure 4-6 System IP
Displays MAC Address of the switch.
15